FAN BALANCING C-CLAMPS
Steel Balancing C-Clamps SC-KIT
Steel Balancing C-Clamps are used as permanent correction weights on vane axial flow fans and squirrel cage fans. They have a serrated surface opposite the set screws that provides additional holding power.
| DESCRIPTION | PRICE |
|---|---|
| Steel Balancing C-Clamps may be purchased as a pre-packaged set consisting of 28 pieces: – 2 of each clamp size from .04 oz. to 8.0 oz. – Includes set of 4 L-wrenches to fit all C-clamps in kit | $245.00 |
Replacement Weights (priced individually)
| PART NUMBER | THROAT SIZE | DESCRIPTION | PRICE |
|---|---|---|---|
| AC-004 | 3/16″ | 1 x .04 ounce | $9.95 |
| AC-01 | 5/16″ | 1 x .10 ounce | $9.95 |
| SC-25 | 5/16″ | 1 x .25 ounce | $9.95 |
| SC-50 | 5/16″ | 1 x .50 ounce | $10.25 |
| SC-75 | 5/16″ | 1 x .75 ounce | $10.25 |
| SC-1 | 7/16″ | 1 x 1.0 ounce | $10.25 |
| SC-150 | 7/16″ | 1 x 1.5 ounce | $10.50 |
| SC-2 | 5/8″ | 1 x 2.0 ounce | $10.50 |
| SC-3 | 5/8″ | 1 x 3.0 ounce | $10.50 |
| SC-4 | 5/8″ | 1 x 4.0 ounce | $10.50 |
| SC-5 | 3/4″ | 1 x 5.0 ounce | $11.50 |
| SC-6 | 3/4″ | 1 x 6.0 ounce | $11.50 |
| SC-7 | 3/4″ | 1 x 7.0 ounce | $11.50 |
| SC-8 | 3/4″ | 1 x 8.0 ounce | $11.50 |
Double Sided Set Screw C-Clamps
These severe-duty balancing correction weight C-clamps are designed for harsher environments or high surface speed. They have set screws on both jaws making them ideal for use in these situations or where fan blades may be corroded or other wise difficult to secure a weight to. The set screws on one side of the C-clamp are tightened until the fan blade is locked in between the set screw points and the serrated surface on the other side of the clamp. The second set of screws on the other jaw are then tightened to further secure the weight.
| PART NUMBER | THROAT SIZE | DESCRIPTION | PRICE |
|---|---|---|---|
| DSS-SC-2 | 5/8″ | 1 x 2.0 ounce | $14.50 |
| DSS-SC-3 | 5/8″ | 1 x 3.0 ounce | $14.50 |
| DSS-SC-4 | 5/8″ | 1 x 4.0 ounce | $14.50 |
| DSS-SC-5 | 3/4″ | 1 x 5.0 ounce | $17.95 |
| DSS-SC-6 | 3/4″ | 1 x 6.0 ounce | $17.95 |
| DSS-SC-7 | 3/4″ | 1 x 7.0 ounce | $17.95 |
| DSS-SC-8 | 3/4″ | 1 x 8.0 ounce | $17.95 |
Stainless Steel Balancing C-Clamps
The Stainless Steel C-Clamps are made from 303 stainless steel and are used as permanent correction weights on vane axial fans and squirrel cage fans.
Pre-Packaged Set STSC-KIT
| DESCRIPTION | PRICE |
|---|---|
| Complete Set: 22 pieces, 2 of each clamp .125 – 8.0 ounces | $455.00 |
Replacement Weights (priced individually)
| PART NUMBER | THROAT SIZE | DESCRIPTION | PRICE |
|---|---|---|---|
| STSC-125 | 3/16″ | 1 x .125 ounce | $19.50 |
| STSC-25 | 5/16″ | 1 x .25 ounce | $19.50 |
| STSC-50 | 5/16″ | 1 x .50 ounce | $19.50 |
| STSC-75 | 5/16″ | 1 x .75 ounce | $19.50 |
| STSC-1 | 5/16″ | 1 x 1.0 ounce | $19.50 |
| STSC-150 | 5/8″ | 1 x 1.5 ounce | $21.50 |
| STSC-2 | 5/8″ | 1 x 2.0 ounce | $21.50 |
| STSC-3 | 5/8″ | 1 x 3.0 ounce | $21.50 |
| STSC-4 | 5/8″ | 1 x 4.0 ounce | $21.50 |
| STSC-5 | 3/4″ | 1 x 5.0 ounce | $23.50 |
| STSC-6 | 3/4″ | 1 x 6.0 ounce | $23.50 |
| STSC-8 | 3/4″ | 1 x 8.0 ounce | $23.50 |
Balldriver L-Wrenches for Use with Balancing SC-Clamps
These wrenches are made from Protanium to withstand high torque and wear. The full set (Part # HW-BDS) contains all eight sizes. The four sizes required to tighten all of the balancing correction C-clamps are also sold individually.
| PART NUMBER | DESCRIPTION | PRICE |
|---|---|---|
| HW-BDS | Balldriver L-Wrench Set; all 8 sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 | $15.00 |
| HW-1/16 | One Balldriver L-Wrench; Fits AC-004 through SC-25 | $1.50 |
| HW-5/64 | One Balldriver L-Wrench; Fits SC-50 through SC-75 | $1.50 |
| HW-3/32 | One Balldriver L-Wrench; Fits SC-1 and SC-150 | $1.50 |
| HW-1/8 | One Balldriver L-Wrench; Fits SC-2 through SC-8 | $1.50 |